Open Cell

Open Cell Spray Foam
Open Cell Spray Foam

Applied as a liquid, Icynene® expands to 100 times its volume in seconds to fill every crack and crevice while remaining flexible so that the integrity of the building envelope seal remains intact over time.

    • Icynene®‘s spray formula has an R-value of 3.7 per inch.
    • Acts as a complete insulation and air barrier to minimize air leakage and seal the building envelope for optimal airtightness.
    • 100 percent water blown.

 

Our New and Improved Open Cell with a higher R-value
Our New and Improved Open Cell with a higher R-value

High R-Value Open-Cell Spray Foam Insulation

Icynene Classic Plus is a high R-value open-cell spray foam that achieves R-22 in 2×6 wall assemblies. Suited for use in residential interior applications, the superior performance of Icynene Classic Plus is ideal for builders in areas requiring a higher R-value to meet the latest building codes.

Key Product Features

  • Aged thermal resistance: 4 per inch
  • Construction types: V – B
  • Core density: 0.7 lb.
  • Air impermeable
  • Superior sound control
  • Class III vapor retarder at 4.25 inches
  • Soft, flexible composition maintains an air seal even after seasonal expansion/contraction of building assembly

Performance Benefits

  • Approved for construction type VB under the IBC and non fire-resistance rated construction under the IRC
  • Stable thermal performance.
  • R-value = 4.0 per inch*
  • Superior sound control.
  • Vapor permeable, support bi-directional drying of assemblies
  • Soft, flexible composition maintains an air seal even after seasonal expansion/contraction of building assembly
  • <5% water absorption
  • Supports indoor air quality by blocking air infiltration and mass transfer of moisture that may cause mold.

    Characteristics

    • Open-cell structure with air
    • 100% water-blown
    • Light density 0.7 lb.
    • HFC- and PBDE-free
    • Soft to touch
    • Class III vapor retarder at 5″.
    • Expands ~100 times from liquid state
    • Application thickness is not limited
    • Low exothermic reaction temperature; will not harm coatings on electrical wiring, plumbing or other building components
    • Lower cost compared to closed-cell products
    • Lowest global warming potential (GWP of 1)
    • A low-emitting material (LEM) as per CHPS EQ 2.2 Section 01350 (Collaborative for High Performance Schools)
Open Cell Designed for Attics that require an ignition barrier
Open Cell Designed for Attics that require an ignition barrier

LOW VOC SPRAY FOAM INSULATION BY ICYENNE

Low-VOC, ignition barrier-free spray foam insulation product

Icynene Classic Max, together with an unvented attic assembly configuration, can help smother an attic fire in less than a minute! The industry’s most thoroughly fire testedspray foam insulation material can help enhance your reputation and the quality of your homes. This low-VOC, ignition barrier-free spray foam also allows for re-occupancy after two hours of active ventilation (at 40 ACH) following installation, meaning less inconvenience for homeowners and a shorter construction schedule.

Key Product Features

  • Aged thermal resistance: 3.7 per inch
  • Construction types: I – V
  • Core density: 0.5 lb.
  • Superior sound control.
  • Vapor permeable, supports bi-directional drying of assemblies
  • <5% water absorption
  • Can be sprayed in a wide temperature range for applications,
  • making it suitable for any climate
  • Ignition barrier free-material for residential unvented attic applications
  • Low-VOC, allowing for re-entry in one hour and re-occupancy in two hours at prescribed ventilation rate

Performance Benefits

  • Stable thermal performance
  • R-value = 3.7 per inch*
  • Superior sound control.
  • Vapor permeable, support bi-directional drying of assemblies
  • Soft, flexible composition maintains an air seal even after seasonal expansion/contraction of building assembly
  • <5% water absorption
  • Supports indoor air quality by blocking air infiltration and mass transfer of moisture that may cause mold.

Characteristics

  • Open-cell structure with air
  • 100% water-blown
  • Light density 0.5 lb.
  • HFC- and PBDE-free
  • Soft to touch
  • Not a vapor barrier
  • Expands ~100 times from liquid state
  • Application thickness is not limited
  • Low exothermic reaction temperature; will not harm coatings on electrical wiring, plumbing or other building components
  • Lower cost compared to closed-cell products
  • Lowest global warming potential (GWP of 1)
  • A low-emitting material (LEM) as per CHPS EQ 2.2 Section 01350 (Collaborative for High Performance Schools)

 

Contact Us Now For a Free Quote

Phone: (207) 338-3077

Fax: (207) 338-3077

Email: Sales@quantuminsulators.com

 

3 Comments

  • whitney
    December 30, 2014 - 12:45 PM | Permalink

    Do you have to tear out all of the drywall to do spray foam insulation?

    • Peter Courand
      March 31, 2015 - 10:29 AM | Permalink

      Hi,

      It depends on if there is already insulation in the wall. If there is not any insulation in the wall, we can inject foam in. We would need to drill a 5/8 inch whole.

  • BuilderEdge
    September 28, 2012 - 12:56 PM | Permalink

    I would like the price for spray foam in a ceiling Total sq ft is near 1170 insulation is for sound proofing. So give suggested thickness and price

    thank you
    aaron Johnson

  • Leave a Reply

    Your email address will not be published. Required fields are marked *