Here are a few pictures from a recent job we completed in Bangor. This just a basic before and after shot of the buildings roof deck. Before foam was installed
Here are a few pictures of a job that we recently finished in Augusta, Maine. Take note on how well the foam fills the complex framing. Once again this picture is just a good demonstration of well the foam adheres and conforms to the framing.
This picture shows a hybrid system with Icynene open cell in the walls and Sips panels in the Roof. This is a great system if you are building post and beam houses or you really want to preserve the existing roof in an old building like these. Using Sips panels makes it easier to leave beams exposed while still insulating the home. These pictures show the steep incline of the road down to the camp. These pictures just don't do the hill justice. We actually had to be pushed out by an excavator! These Pictures show the two cottages that were sprayed. This...
On this job we decided to do a hybrid system. We sprayed our open cell foam to the attic floor. Then we sprayed the walls with closed cell. We did this because this is a metal building. The closed cell offers the rigidity and low vapor permeable material needed for metal buildings. However we were able to spray open cell to the attic floor which provided our customer with decent savings on the project because our open cell is less expensive. Open Cell being installed in attic floor Closed Cell in the walls
This is a large Retro-Fit that we did on Islesboro, Maine. We sprayed the attic and sealed all of the mechanicals into the heated space. This should cut their heating bills drastically. Views of Penobscot Bay Loading the Rig on the Ferry
This article outlines a typical Icynene Spray Foam install. In this situation Icynene was installed in Habitat for Humanity project. You may want to follow similar parameters when doing you project. Insulating with Icynene Spray Foam Gives Habitat for Humanity Projects a Higher Return on Investment - Yahoo! Finance.
This picture is taken before we sprayed. This picture was taken after we sprayed. When insulating your heating pipes like this it is important to keep your domestic water separated for your heated water. Otherwise you may not have any cold water to drink!
This Job proved to be very interesting because the owner of the building had a 50 sail boat directly in the middle of the spray area!! We used our construction experience and general know-how to create a safe, well covered, and practical solution. We don't like to take chances. Especially with a high valued items like this sail boat. Sail Boat in the Middle of Spray Area Attatched living space to garage with in-floor heat.
Mechanical Room in Farmington
Bar Harbor Maine