Spraying Foam Insulation in Augusta, Maine
Here are a few pictures of a job that we recently finished in Augusta, Maine. Take note on how well the foam fills the complex framing. Once again this picture is just a good demonstration of well the foam adheres and conforms to the framing.
Spraying Foam Insulation In Mount Desert, Maine
This picture shows a hybrid system with Icynene open cell in the walls and Sips panels in the Roof. This is a great system if you are building post and beam houses or you really want to preserve the existing roof in an old building like these. Using Sips panels makes it easier to leave beams exposed while still insulating the home. These pictures show the steep incline of the road down to the camp. These pictures just don't do the hill justice. We actually had to be pushed out by an excavator! These Pictures show the two cottages that were sprayed. This...
Closed Cell and Open Cell Hybrid in Belfast, Maine
On this job we decided to do a hybrid system. We sprayed our open cell foam to the attic floor. Then we sprayed the walls with closed cell. We did this because this is a metal building. The closed cell offers the rigidity and low vapor permeable material needed for metal buildings. However we were able to spray open cell to the attic floor which provided our customer with decent savings on the project because our open cell is less expensive. Open Cell being installed in attic floor Closed Cell in the walls
Spraying insulation on Islesboro, Maine
This is a large Retro-Fit that we did on Islesboro, Maine. We sprayed the attic and sealed all of the mechanicals into the heated space. This should cut their heating bills drastically. Views of Penobscot Bay Loading the Rig on the Ferry
Spraying in Deer Isle, Maine
This Job proved to be very interesting because the owner of the building had a 50 sail boat directly in the middle of the spray area!! We used our construction experience and general know-how to create a safe, well covered, and practical solution. We don't like to take chances. Especially with a high valued items like this sail boat. Sail Boat in the Middle of Spray Area Attatched living space to garage with in-floor heat.
Spray Foam Job in Farmington, Maine
Mechanical Room in Farmington
Spray Foam Job in Bar Harbor Maine
Bar Harbor Maine
Spraying a House in Port Clyde, Maine
On this job we cathedralized the building envelope by spraying our open cell foam directly the the roof deck. This helps to expand the living space and reduce wasted space. Spraying Foam in Port Clyde, Maine Bob applying Window Foam As part of creating a totally sealed building envelope, we suggest using canned spray foam around all of the windows and doors. We suggest a few different kinds in our DIY section if you feel like doing it your self.
Foaming a Trench in Midcoast Maine
This picture shows the process of insulating an underground heat run with closed cell spray foam insulation. On a similar project we sprayed a trench that was 300 feet long. The degree change from one end of the heat run to the other was under one degree! Work in Progress Finished product